Samsung CLX-9250ND - Page 231

3. Replaceme
n
3.13.2 Regi Bracket Assembly and S
e
Perform the following procedure to remove the Regi Br
a
1 Open the Side Cover[A]
1
.
Open
the
Side
Cover[A]
.
2. Unplug connector after removing 2 screws and Har
n
3. Remove the Regi Bracket Assembly after removing
[B]
Service Manual
CLX-9250/9350 series
3-1
n
t Procedures
e
nsors
a
cket Assembly and Sensors from the printer.
n
ess cover [B].
3 screws.
SAMSUNG ELECTRONICS
03