Code Displayed Name
100-0420 Waste toner motor
100-0490 LSU motor1 forward
100-0500 LSU motor2 forward
100-0530 LSU shutter motor forward
100-5000 T1 engage sensor1
100-5010 T1 engage sensor2
100-5020 T2 engage sensor
100-5040 Yellow OPC/DEV motor ready
100-5050 Magenta OPC/DEV motor ready
100-5060 Cyan OPC/DEV motor ready
100-5070 Black OPC/DEV motor ready
100-5160 Fuser motor read
100-5200 LSU motor1 run ready
100-5210 LSU motor2 run ready
100-5220 LSU Shutter Sensor
101-0010 Tray1 pick up clutch
101-0020 Tray2 pick up clutch
101-0030 Tray3 pick up clutch
101-0040 Tray4 pick up clutch
101-0070 Bypass pick up clutch
101-0220 Magenta Dev clutch
101-0240 Black Dev clutch
101-5010 Duplex gate solenoid
101-5040 Face up gate solenoid
102-0020 Tray1 paper empty sensor
102-0100 Tray1 feed sensor
102-0130 Tray2 paper empty sensor
102-0210 Tray2 feed sensor
Service Manual
CLX-9250/9350 series
4-
user motor forward on/off
user press control motor on/off
SU yellow, magenta motor forward on/off
SU cyan, black motor forward on/off
he LSU shutter motor forward on/off
etect if the T1 engage sensor1 is on or off.
etect if the T1 engage sensor2 is on or off.
etect if the T2 engage sensor1 is on or off.
etect if yellow OPC/DEV motor runs at normal speed
etect if magenta OPC/DEV motor runs at normal
etect if cyan OPC/DEV motor runs at normal speed
etect if black OPC/DEV motor runs at normal speed
etect if fuser motor runs at normal speed
etect if ITB motor runs at normal speed
etects if LSU motor1 runs at normal speed.
etects if LSU motor2 runs at normal speed.
etect if the LSU Shutter motor is on or off
ngages drive to pick up a paper from tray1.
ngages drive to pick up a paper from tray2.
ngages drive to pick up a paper from tray3.
ngages drive to pick up a paper from tray4.
ypass Pickup clutch(MP Tray).
Engages drive to color motor dev
ngages drive to color, motor dev
ngages drive to color, motor dev
ngages drive to color, motor dev
uplex gate solenoid on/off
ace up gate solenoid on/off
etect when paper is in tray1.
etect when a paper is at feed sensor.
etect when paper is in tray2.
etect when a paper is at tray2 feed sensor. (optional)
SAMSUNG ELECTRONICS