Samsung CLX-9250ND - Page 294

4.Servi
c
Purpose To minimize difference in imag
Operation
Procedure
1. Run ID Sensor Calibration
2. Print out a test pattern for
s
designed for A3 or ledger s
• Diagnostics > Color Mana
g
ement > Auto Co
l
designed
for
A3
or
ledger
s
in a tray.
3. When a test pattern is prin
t
4. The arrow in left top of the
scan glass and to be place
5. Run the pattern scanning
b
6.
A
fter scanning, run Norma
l
7. Exit ID Sensor Calibration
m
Verification Print out a test job and make s
u
has disappeared.
Specification
N/A
Specification
N/A
Reference N/A
Service Manual
CLX-9250/9350 series
4-
4
c
e Mode
e quality between sets
s
ensor calibration. Note that the test pattern is
size Make sure that required media size is loaded
l
or Tone Ad
j
ustment > ID Sensor Calibration
size
.
Make
sure
that
required
media
size
is
loaded
t
ed out, locate the pattern on the scanner.
test pattern need s to head to the left-top side of
d face down.
b
y pressing “OK” button.
l
TRC by pressing “OK” button.
m
ode.
u
re the difference in image quality between sets
SAMSUNG ELECTRONICS
4
5