Samsung CLX-9250ND - Error Code Details

7. Trouble
s
● Code :
A1-1113
● Error message :
A
ctuator Motor Failu
7.2.2 Error Code Details
A1-1213
A
ctuator Motor Failu
● Symptom / Cause :
Fuser motor does not operate.
Fuser motor is operating but is recognized as stop sta
t
● Troubleshooting method :
1. Turn the machine off. Check if there is any foreign
m
2. Remove the fuser unit and reinstall it.
3. Turn the machine on. Is the problem solved?
If not, go to the next.
4. Turn the machine off.
Open the engine/video shield door.
Check if the fuser/exit motor connector is connecte
d
If the problem persists, replace the fuser/exit drive
m
Fuser/Exit drive
motor
5. If the motor operates normally, replace the fuser un
i
● Replacement part
- JC31-00123B (MOTOR BLDC)
- JC91-00931A (FUSER : 220V)
Service Manual
CLX-9250/9350 series
7-
1
- JC91-00930A (FUSER : 110V)
s
hooting
re #A1-1113: Please open/close door.
re #A1-1213: Please open/close door.
t
us.
m
atter around the fuser unit.
d
properly.
m
otor. (Refer to 3.11.2 of the chapter 3)
i
t.
SAMSUNG ELECTRONICS
1
5