Samsung CLX-9250ND - Page 356

7. Trouble
s
● Code :
A1-1613
● Error message :
A
ctuator Motor Failu
● Symptom / Cause :
ITB motor does not operate.
ITB motor is operating but is recognized as stop statu
s
● Troubleshooting method :
1. Turn the machine off. Check if there is any foreign
m
2. Remove the ITB unit and reinstall it.
3. Turn the machine on. Is the problem solved?
4. Turn the machine off.
Open the engine/video shield door.
Check if the ITB BLDC motor connector is connect
e
If the problem persists, replace the ITB BLDC mot
o
ITB BLDC motor
ITB
BLDC
motor
5. Replace the motor and controller. If the motor oper
a
● Replacement part
- JC31-00123A (MOTOR BLDC)
- JC96-05689A : CARTRIDGE-TRANSFER ITB
Service Manual
CLX-9250/9350 series
7-
1
s
hooting
re #A1-1613: Please open/close door.
s
.
m
atter around the ITB unit.
e
d properly.
o
r. (Refer to 3.8.2 of the chapter 3)
a
tes normally, replace the ITB unit.
SAMSUNG ELECTRONICS
1
6