Samsung CLX-9250ND - Blurred Image

7. Trouble
s
A. T
yp
ical fault
y
ima
g
es
7.3.5 Blurred image
yp y g
Step Section Check ite
m
1 Image check There is Blurred area
a
side section.
B. Troubleshooting procedure
2 There is Blurred area
a
side section.
3 LSU The surface of the LS
U
dirty.
4 Imaging unit Dirty on the outside.
5 The problem has been
through the checks of
s
4.
5 Scanner Original does not lie fl
a
6 DADF does not lie flat.
7
Remove lens cover by
screws. Check CCD le
n
against contamination
o
objects.
Service Manual
CLX-9250/9350 series
7-1
s
hooting
m
Result Action
a
t the Front Yes 1.Change paper to one
just unwrapped from its
package.
2. Print the image on Thin
paper mode.
a
t the rear Yes
U
window is Yes Clean
Yes Clean
eliminated
s
teps up to
No Change imaging unit.
 Change LSU.
a
t. Yes Change original.
Yes Change DADF if it is
deformed or hinges are
broken (Refer to 3 12
broken
.
(Refer
to
3
.
12
DADF unit)
undoing 2
n
s surface
o
r foreign
Yes Clean the contaminated
part.
Caution
Fragile parts!
SAMSUNG ELECTRONICS
54