Samsung CLX-9250ND - Page 500

7. Trouble
s
Step Section Check item
7 TRC Report Print the TRC report (Servic
Information > Printer Repor
t
Control History > Print). Ple
a
there is any error in the rep
o
number greater than zero in
number
greater
than
zero
in
stands for an error. Also ch
e
ErC, ErK. LocL, LocC, and
L
8 Toner supply
device
Connectors are loose.
9 Motor is defective.
10 The problem has been elimi
the checks of steps up to 9
Service Manual
CLX-9250/9350 series
7-1
s
hooting
Result Action
e Report >
t
s > TRC
a
se check if
o
rt. If any
"
Fail
"
column
Yes 1. Check if the ITB
engage and disengage is
operated normally.
2. Replace the Imaging
Unit
Fail
column
e
ck ErY, ErM,
L
ocR column.)
Unit
.
Yes Reconnect.
Yes Change the toner supply
motor.
nated through No  Change video board
 Change LSU.
 Change HVPS board.
SAMSUNG ELECTRONICS
60