Media and tray_ 47
• The process to load paper in tray 1, tray 2, tray 3, and tray 4 is the
same.
Using photographic paper or coated paper may cause problems, that
require repairs. Such repairs are not covered by the warranty or
service agreements.
1. Squeeze the lock lever on the handle and pull out the tray.
2. Squeeze the paper length guide, and pull it to the end of the tray.
3. Squeeze the paper width guide, and pull it to the end of the tray.
4. Flex and fan the edge of the paper stack to separate the pages before
loading papers.
5. Load paper with the print side facing up.
1 Paper length guide
1
1 Paper width guide
1
To Next Page
Loading...
