Troubleshooting_ 197
11. Pull out the OPC protecting pad.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
12. Hold the handles on the new imaging unit, and push the imaging unit
until it locks into place.
13. Close the inner cover.
14. Take out the LSU window cleaning stick.
To Next Page
Loading...
