Copying_ 67
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see
"Loading originals"
on page 35).
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see
"Changing the
settings for each copy" on page 54).
4. Press the Advanced tab > Image Shift from the display screen.
5. Press the appropriate option.
• Off: Disables this feature.
• Auto Center: Automatically position at the center of the paper.
• Custom Margin: You can adjust the margin of the paper.
- Top & Bottom: Adjusts the margin of the top or bottom of the
paper using arrows.
- Left & Right: Adjusts the margin of the left or right of the paper
using arrows.
6. Press OK from the display screen.
7. Press Start on the control panel to begin copying.
To Next Page
Loading...
