Scanning_ 84
Image tab
You can move to next or previous page using the up/down arrows
located at the bottom left.
• Original Type: Selects whether the original is text, photo, etc (see
"Selecting the type of originals" on page 99).
• Color Mode: Adjusts the color options of scanned output (see
"Selecting the color mode" on page 99).
• Darkness: Adjusts the degree of darkness of scanned output (see
"Changing Darkness" on page 100).
• Sharpness: Adjusts the sharpness level of scanned output. (see
"Changing Sharpness" on page 100).
• Contrast: Adjusts the contrast level of scanned output. (see
"Changing Contrast" on page 100).
• Back: Returns to the Basic tab.
• Adjust Background: Erase the background to some extent by
adjusting density or brightness (see
"Adjusting background" on
page 100).
• Erase Backside Image: Prevents scanning the other side’s image
shown through the original paper (see
"Erasing backside Images" on
page 101).
• Scan to Edge: Scans originals from edge-to-edge (see "Scan to
Edge" on page 101).
• Back: Returns to the Basic tab.
Output tab
• Quality: Adjusts the display quality of the scanned output (see
"Quality" on page 101).
• Scan Preset: Automatically changes some scan options, such as
file format and resolution. You can adjust options to fit each specific
purpose (see "Scan Preset" on page 101).
• File Format: Selects the file format of the scanned output (see "File
Format" on page 102).
• File Name: Makes the file name for the file to be sent (see "File
Name" on page 102).
• Back: Returns to the Basic tab.
To Next Page
Loading...
