Samsung CLX-92x1 Series - Changing the Settings for each Copy; Selecting the Paper Supply Tray

Copying_ 61
7. Press Start from the control panel to begin copying.
Changing the settings for each copy
On the Basic tab of the Copy screen, you can select copy features before
starting to copy.
The Basic tab setting is only for the current copy job, which means the
selected settings do not apply to the next copy job. After finishing the
current copy job, the machine automatically restores the default
settings, or when you press the Clear button on the control panelU
Selecting the paper supply tray
Paper Supply sets the tray containing the paper to be used for printing. The
machine prints the scanned image on the paper in the selected tray. You
can see the icons that show paper sizes and the remaining amount of paper
in each tray.
Press the Basic tab > Paper Supply, then press the appropriate paper tray.
• Auto: Automatically detects the paper size with the paper tray.
• Other preset values: Check the paper size in each tray and press the
tray containing the paper size you want.
The tray icons below represent remained paper in each tray.
XWWG¥G
^
XL
^WG¥GZXLZWG¥GXXL
Under
X
0L
Empty