Samsung CLX-9350ND - Interface Part

2. Product
d
The CLX-9x50 series
p
rovides clear interface s
p
ecific
a
2.11.6 Interface Part
pp
due to the design strategy for common-use and stand
a
Controller and the Engine Controller uses two pairs of
makes it possible to have a sliding connection to the
M
Controller use a PCIe interface to achieve high perfor
m
standard harnesses are used to reduce manufacturin
g
2.11.7 Connection Part
Controllers require connections to all of the system un
Solenoid, Sensor, and other PBAs. The Engine Cont
r
electronic signals through signal wires. The signal wi
r
starting and stopping the motors, operating clutches,
a
Service Manual
CLX-9250/9350 series
2-
9
d
escription
a
tions of all com
p
onents and modules in the s
y
stem,
py
a
rdization. The main interface between the Main
drawer type board-to-board connectors, which
M
ain Controller. The Main Controller and the IP
m
ance. In the connection of mechanical parts,
g
costs and to allow convenient maintenance.
its such as the BLDC motor, Stepping Motor, Clutch,
r
oller contains various types of connectors, to deliver
r
es provide electronic control signals that are used for
a
ctivating solenoids, sensing the unit state, etc.
SAMSUNG ELECTRONICS
9
0