Samsung CLX-9350ND - Page 170

3. Replaceme
n
[C]
[C]
6. Remove 2 bearings [D] (one on each end )
[D]
7. Remove the Fuser Roller and Belt.
Service Manual
CLX-9250/9350 series
3-
4
n
t Procedures
5. Remove the Bracket HR[C].
CAUTION
Be careful not to bend the Bracket HR.
If it is bent, the bearing can be released easily.
It can damage the belt, overheat and make a fire.
[D]
SAMSUNG ELECTRONICS
4
2