Samsung CLX-9350ND - DADF System

2. Product
d
2.10 Duplex Automatic Doc
u
2.10.1 DADF System Overvi
e
This section describes the DADF system parts and pr
o
The following diagram and table include locations and
R1 R2
R3
R4
R5
Symbol Part Name Function
R1 Simplex registration roller
A
ligns pap
e
R11
R13
R14
R15
R12
R10
R16
R2 Forward roller
Separates
a
path.
R3 Retard roller Prevents
m
R4 Pick up roller Picks up a
n
R5 Duplex reverse gate Roller for d
u
R6
Original document tray
Tray for mu
R6
Original
document
tray
Tray
for
mu
R7 Exit tray
A
rea wher
e
R8 Duplex reverse tray Tray for re
v
R9 Exit roller Sends an
o
R10 Exit turn roller Turns a ori
g
R11 Exit turn gate Changes t
h
R12 Duplex reverse roller Reverses
a
R13 Junction gate Divides the
R14 Feed out roller Ejects a sc
a
R15 Duplex registration roller
A
ligns pap
e
Service Manual
CLX-9250/9350 series
2-
6
R16 Feed in roller Feeds an o
d
escription
u
ment Feeder(DADF) System
e
w
o
cesses.
descriptions of the DADF system.
R6
R7
e
r and transfers it to the paper path in simplex mode.
R8
R9
: Simplex path
: Duplex path
a
n original from the tray and transfers it to the paper
m
ulti-feeding.
n
original from the tray.
u
plex reverse path.
ultiple page scanning
ultiple
page
scanning
.
e
the paper exits.
v
erse in duplex mode
o
riginal to the exit tray.
g
inal direction for collate exit after duplex scan.
h
e paper path for collate exit after duplex scan.
a
n original in Duplex Mode after scanning a page.
path direction into either simplex or duplex.
a
nned original.
e
r and transfers it to the paper path in duplex mode.
SAMSUNG ELECTRONICS
6
1
riginal before scanning.