EasyManua.ls Logo

Samsung DA68 - Specialized Modes and Filter Usage

Samsung DA68
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 27
OPERATING
( 3 )
Chef Pantry
Chef
Pantry
Chef pantry will change to Fish/Meat or
Fridge Mode automatically depending
on the set fridge temperature.
The Fish/Meat Mode lets you store
sh and meat at its freshest for a short
period of time.
To store fi sh or meat for longer, put it
into the Cool Select Room and select
the “Freezer” or “Soft Freeze” functions.
If you set the fridge temperature to
1~2°C the Chef Pantry changes to
Fish/Meat Mode and the Fish/Meat
icon lights.
The Chef Pantry is set to -1°C in the
Fish/Meat mode.
If you set the fridge temperature to
3~7°C the Chef Pantry changes to
Fridge Mode and the Fridge Icon
turns on.
( 4 )
CoolSelect
(Hold 3 sec for Reset Filter)
The CoolSelect button lets you set
the Cool Select Room on the bottom
right of your refrigerator to one of
four settings: Freezer, Soft Freezing,
Chill, or Cool.
To reset the water fi lter life indicator.
After you replace the water fi lter,
touch and hold this button for 3
seconds to reset the water fi lter life
indicator.
Freezer
Touch Freezer to set the Cool Select
Room to the same temperature as the
freezer.
Use this setting to keep frozen food
fresh.
Soft
Freeze
Touch Soft Freeze to set the
temperature in the Cool Select Room
to -5°C.
This feature helps keep meat and
sh fresh longer.
Chill
Touch Chill to set the temperature of
the Cool Select Room to -1°C.
Cool
Touch Cool to set the temperature of
the Cool Select Room to 2°C.
You can keep water, juice, soft
drinks, beer, etc. cold.
Filter
Water fi lter usage
This icon lights when you need to change
the fi lter, usually after the refrigerator has
dispensed about 300 gallons of water
(after about 6 months).
The icon will blink red for several seconds
when you open or close the door.
After you install the new water fi lter, reset
the fi lter indicator by touching and holding
the CoolSelect/hold 3sec for Filter Reset
button for 3 seconds.
If water is not dispensing or dispensing
slowly, you need to replace the
water fi lter because the water fi lter is
clogged.
Some areas have large amounts of
lime in their water, which causes the
water fi lter to clog more quickly.
DA68-03013E-03.indb 27DA68-03013E-03.indb 27 2015. 8. 26.  10:382015. 8. 26.  10:38

Related product manuals