Using the TV
(Optional)
3
When the channel scanning screen appears, click Scan.
4
The channel scanning is complete.
Resetting the channels
Select Home > Settings > Channel. Then select Scan. The
scanned channels are saved.
If you cannot scan channels easily, select the Reset TV Signal
option in the Channel menu to reset the channels.
Note on Conguration
The setup procedures may dier depending on the current •
type of your TV service.
You should set the product to the region and postal code •
where your computer is currently installed.
If the TV signal provider setup screen appears, select the •
correct provider. If the congured provider is not correct, not
all of the channels will be received or the TV picture quality
may be degraded.
To Next Page
Loading...
