Troubleshooting _47
08 TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE WHAT TO DO
Dishwasher leaks • Overfill dispenser or rinse
aid spills.
• Be careful not to overfill the rinse aid
dispenser.
Spilled rinse aid could cause overusing
and lead to overflowing.
Wipe away any spills with a damp cloth.
• Dishwasher isn’t level. • Make sure the dishwasher is level.
Buttons are not
working on power on
state
• Door is open. • When door is opened, buttons are not
working except Power button. Close the
door and press the button.
• Control lock function is
selected.
• When selected Control lock function,
buttons are not responded. To unlock
this function, hold down both the Multi tap
and Delay start buttons for three (3)
seconds.
Also, Control lock function is released
when power cord is reconnected.
The result of washing performance may be caused by a power supply issue. Try another program
before contacting for service.
DW5500M-02437D-00_EN.indd 47DW5500M-02437D-01_EN.indd 47 3/14/2017 5:30:52 PM3/14/2017 5:30:52 PM
To Next Page
Loading...
