Camera
38
Adjusting the ISO sensitivity
The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the International
Organisation for Standardisation (ISO). Select a higher resolution to take better photos and
reduce blurriness when taking photos in low-light conditions without using the flash.
Tap
→
Expert
→
A
/
S
/
M
/
P
, and select an ISO sensitivity.
Selecting a higher ISO sensitivity may result in more image noise.
Using face detection
In camera mode, tap
→
Camera
→
Face detection
, and select one of the following:
•
Normal
: Measures exposure on a human face. (p. 39)
•
Smile shot
: Recognises and helps taking people’s smiling faces. (p. 39)
•
Blink detection
: Detects closed eyes and automatically takes additional photos. (p. 40)
•
When a face is detected, the device tracks the face automatically.
•
This feature may not be effective in the following conditions:
–
The subject is too far from the device.
–
The lighting is too bright or too dark.
–
The subject is not facing the device.
–
The subject is wearing sunglasses or a mask.
–
The subject’s facial expression changes drastically.
–
The subject is backlit, or the lighting conditions are unstable.
•
This feature may not be available in some modes and settings.
•
Depending the selected option, some settings may not be available.
To Next Page
Loading...
