I
Setting
Up
Your Remote Control
After your remote control has been properly set up, your remote control can operate in five different modes:
TV,
VCR,
Cable,
DVD
or
Set-Top Box. Pressing the corresponding button on the remote control allows you to
switch among these modes, and control whichever piece
of
equipment you choose.
~
The remote control might not be compatible with all DVD Players, VCRs, Cable, STB and Set-Top Boxes.
Setting Up the Remote to Operate Your
VCR
1 Turn off your VCR.
2 Press the VCR button
on
your TV's remote control.
3 Press the SET button
on
your TV's remote control.
4 Using the number buttons on your remote control, enter three digits
of
the VCR code listed
on
page
25
of
this manual for your brand
of
VCR. Make sure you enter three digits
of
the
code, even if the first digit
is
a "0". (If more than one code
is
listed, try the first one.)
5 Press the POWER button
on
the remote control. Your VCR should turn
on
if
your remote
is
set up correctly.
If your VCR does not turn
on
after set-up, repeat steps
2,
3 and 4, but try one of the other codes
listed for your brand
of
VCR. If no other codes are listed, try each VCR code, 000 through 080.
Note
on
Using Remote Control Modes: VCR
When your remote control
is
in
VCR mode, the volume buttons still control your TV's volume.
Setting
Up
the Remote to Operate Your Cable Box
1 Turn off your cable box.
2 Press the
CABLE
button
on
your TV's remote control.
3 Press the SET button
on
your TV's remote control.
4 Using the number buttons
on
your remote control, enter three digits of the cable box code
listed
on
page 26 of this manual for your brand
of
cable box. Make sure you enter three
digits of the code, even if the first digit is a "0". (If more than one code
is
listed, try the first
one.)
5 Press the POWER button
on
the remote control.
Your cable
box
should turn on
if
your remote
is
set up correctly.
If your cable box does not turn
on
after set-up, repeat steps
2,
3 and 4, but try one
of
the other
codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through
046.
Note
on
Using Remote Control Modes: Cable Box
When your remote control
is
in
CABLE
mode, the volume buttons still control your TV's volume.
0=~:r--
\~i~r®
0
CD®0
0®®~1
7 ® 9
8
(5
NnENNA
CH
LIST
WISELINK
HOMI
____
0
__
0
__
0
__
0 _
--------------
MTS
SRS
Pf'
D~D~
FAV.CH
AUTO
PROG.
ADDIOEl
eli
DDDGJ
~JSfT
OIOSfT
'.iftMSUNG
\"'----
J
-------~----~---=~--I
\~-o:r®
0
CD®0
0®®~1
7 ® 9
8
(5
___
0_0_0:_0
-
--------------
Mrs
SRS
PI'
DCS!DD~
fAV.CH
AUTO
PROG.
AODlOEl
CI'!
DO
DGJ
~::'SET
o
RESET
'.iftMSUNG
\
-J)
Continued
...
To Next Page
Loading...
