Samsung FP-T5894W - Picture Settings Adjustment; Resetting Settings and Digital Noise Reduction

5 Press the. or T button to select Color Tone, then press the ENTER button.
6 Press
the. or T button to select Cool2, Cool1, Normal, Warm1 or Warm2,
then press the ENTER button.
» When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected.
Resetting the Picture Settings to the Factory Defaults
7 Press the. or T button to select Reset, then press the ENTER button.
Press
the. or T button to select OK, then press the ENTER button.
Press the
EXIT button to exit.
» Each picture mode can be reset.
I
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help
reduce any static and ghosting that may appear on the screen.
1 Press the MENU button to display the menu.
Press the
ENTER button to select Picture.
2 Press the. or T button to select Digital NR, then press the ENTER button.
3 Press the • or T button to select Off,
Low, Medium, High or Auto,
then press the ENTER button.
Press the
EXIT button to exit.