Samsung FP-T5894W - Image Rotation

Rotating
1 After switching the mode to WISELlNK, select the memory device that you have
inserted. (Refer to page 65)
2 Press the" or ~ button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3 Press the ./T I "/~ buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
screen.
4 Press the INFO button to display the option (Start Slide Show, Rotate, Zoom,
List).
Press the. or T button to select Rotate, then press the ENTER button.
Press the. or T button to select desired item, then press the ENTER button.
(90
0
.--> 180
0
---> 270
0
---> 0
0
)
~ Rotating directly from 90 degrees to 270 degrees is not possible.
~ When rotating a photo, the edge of the photo may not be displayed on the
screen.
To exit WISELINK mode, press the WISELINK button on the remote control.
>- The rotated file is not saved.
The Rotating function information icon (Displayed at the top left of the screen)
Icon
Current aso
Function
[!lM:hM
Rotating (90°)
To rotate a photo by 90 degrees
[i]iijil'fi!l
Rotating (180°) To rotate a photo by 180 degrees
C-'."I.'
Rotating (270°) To rotate a photo by 270 degrees
00-'
Rotating (0°)
To rotate a photo to its original state.
[J Press the WISELINK button on the remote control to turn on the WISELINK mode.
Continued ...