I
Auto Wall-mount adjustment (Sold separately)
(FP-T5094W)
Once the
auto
wall
mount
is
installed, the
position
of
your
TV can be
easily
adjusted.
TV
Rear Panel
Auto
Wall-Mount
I
(63)
e
""K<
"1-"'--------'---../
o
EX·L1NK Cable (Not supplied)
P.MOOE
S.MOOE
sm
P.S~E
:
----~:
DG!DCJ~]
I:
FAV.CH
AUTO
PROG.
ADDIDEL
eH
:
DDDG]
:
___________
~~
Olll>.~
• ;
Entering the menu
1 Press the
A,
...
,
....
or
~
button
on
your remote control.
~
The Wall.Mount Adjustment screen
is
displayed.
~
If the Wall Mount Adjustment screen
is
not displayed when clicking
on
a
direction button while watching your
TV,
use the menu to display that screen.
• Press the MENU button to display the menu. Press the A or
...
button to
select Setup, then press the ENTER button.
• Press the A or
...
button to select Wall-Mount
Adjustment,
then press the
ENTER button.
Remembering the
Position
2 Adjust
to
the desired position using the
A,
...
,
....
,
~
buttons.
~
If you press
an
arrow button when
no
OSO
is
displayed
on
the TV screen, the
Adjustment screen appears.
~
Press the INFO button to reset. Press the
....
or
~
button to select Yes, then
press the ENTER button. The position
is
initialized to the default setting.
3 Press the Blue button.
Press the A
and'"
buttons
to
select a save mode from either Position1, Position2
or
Position3
in
order to save the current position.
~
To
not save the current position, press the RETURN button.
~
When selecting a save mode, you cannot use the Color buttons.
4 Press the ENTER button
to
save.
~
When Position1
is
selected, the message
Current
position
saved as
Position1
is
displayed.
5 Press the ENTER button.
~
The saved Position appears
on
the left side of the
OSO.
Moving
to
the remembered
position
1 Complete Step 1 of
Entering
the menu.
2 Pressing a Color (Red, Green, Yellow) button moves the auto wall mount
to
the
saved position.
~
You
can move the wall mount to one of the 3 pre-set positions by pressing the
Red (Position
1),
Green (Position 2) or Yellow (Position
3)
buttons.
~
If you adjust the positon after moving to a pre-set position, the position display
will disappear.
~
For installation, refer to the Installation Manual provided with the wall mount.
~
For product installation and the installation and moving of the wall mount, make
sure
to
consult a specialized installation company.
~
This installation manual
is
to
be
used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
~
The auto wall mount will not work when Anynet+
is
operating.
To Next Page
Loading...
