Samsung FP-T5894W - DVD Player Connections; HDMI, Audio;Video, and Component Connections

D
D
D
Connecting a DVD Player
Connecting to HDMI (High Definition Multimedia Interface)
Rear Panel of Wireless .~ ~ ~ ~s>
Home AV Center ~ e. :-::iu-f.
HOMI cable
(Not supplied)
DVD Player
Connecting to Audio and Video Jacks
Rear Panel of Wireless
Home
AV Center
DVD Player
Connecting to V, PB, PR
Rear Panel of Wireless
Home
AV Center
Component cable
(Not supplied)
DVD Player
English.7
Connect an HOM I Cable between
the HDMI IN (1, 2 or 3) on the
Wireless Home AV Center and the
HOM I OUT on the DVD Player.
Press the SOURCE button on the
remote control until you see the
DVD Player signal (see "Viewing an
External Signal Source" on page 13).
- Please make sure the HDMI source's
(DVD Player) power IS on before
selecting HOMI from the Source List on
the TV
Connect a Video cable between
the AV IN 1 [VIDEO] (or AV IN 2
[VIDEO]) jack on the Wireless
Home AV Center and the VIDEO
OUT jacks on the DVD Player.
Connect Audio cables between the
AV IN 1 [R·AUDIO-L] (or AV IN 2
[R-AUDIO-L]) jacks on the Wireless
Home AV Center and the AUDIO
OUT jacks on the DVD Player.
Press the SOURCE button on the
remote control until you see the
DVD Player signal (see "Viewing an
External Signal Source" on page 13).
- When connecting a DVD Player match
the color of the connection terminal to
the cable
Connect a Component cable
between the COMPONENT IN 1 [Y,
Pe, PRJ (or COMPONENT IN 2 [Y,
Pe, PR]) jacks on the Wireless Home
AV Center and the COMPONENT
OUT [Y, Pe, PRJ jacks on the DVD
Player.
Connect Audio cables between the
COMPONENT IN 1 [R-AUDIO-L]
(or COMPONENT IN 2 [R-AUDIO-
L]) jacks on the Wireless Home AV
Center and the AUDIO OUT jacks
on the DVD Player.
Press the SOURCE button on the
remote control until you see the
DVD Player signal (see "Viewing an
External Signal Source" on page 13).
- When connecting a DVD Player, match
the color of the connection terminal to
the cable,