Samsung FX710 Series User Manual

- 1/36 -
Gas Oven Repair Guide
[ FX710*, FX510*]
• Cooktop ignition
• Oven ignition
Ignition
Failure
• Oven
• Cooktop
Heating
defect
• Button, Motors
• Lamp
Abnormal
Flame
• Smell, Smoke, Noise
• No Display, Key Panel
Others
• Sensors
• Temperature control
Error
Code
Ver. Aug-2013
All manuals and user guides at all-guides.com
all-guides.com

Samsung FX710 Series Specifications

General

Type	Electric
Convection	Yes
Self-Cleaning	Yes
Number of Cooking Levels	5
Timer	Yes
Voltage	220-240 V
Frequency	60 Hz

Summary

#1. Symptom : Ignition Defect (Cooktop)

Tip 1-1. Electrode Inspection

Inspects electrode wire and clip for damage and proper connection for cooktop ignition.

#2. Symptom : Ignition Defect (Oven)

Tip 2-1. HSI Inspection

Inspects HSI damage and ignition state, checking connection and resistance for oven ignition.

#3. Symptom : Heating Defect (Oven)

Tip 3-1. Temperature Selection Inspection

Verifies temperature conversion settings and guides adjustment of oven temperature range.

#4. Symptom : Heating Defect (Cooktop)

Tip 1-5. Nozzle Inspection

Inspects cooktop orifices for debris and correct diameter for proper gas flow and heating.

#5. Symptom : Flame Defect (Cooktop)

Tip 5-1. Cooktop Flame-Out / Low Flame is Large

Troubleshoots cooktop flame-out or low flame issues via gas pressure check and valve adjustment.

#6. Symptom : Other Defects

Tip 6-1. Smell / Smoke Inspection

Inspects air shutter opening area for potential causes of smell or smoke.

#6. Symptom : Other Defects

Tip 6-2. Door / Drawer Open/Close Defect

Inspects door/drawer hinges, rails, and assembly for issues affecting opening/closing.

#7. Symptom : Error Code

Tip 7-1. Key Panel Short (-SE-) Check

Checks key panel for imprints, dents, and ribbon cable corrosion or damage.