Samsung G75T Series - Power and USB Hub Connections

15
Connecting the Power
C27G7*T*
1 (SERVICE)
2
2
1
2
3
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 22V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.
C32G7*T*
1 (SERVICE)
2
2
2
1
3
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 24V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.
Connecting the Product to a PC as a USB HUB
Using the product as a hub, connect and use various source devices with the product at a time.
1 (SERVICE)
2
―
To detect and start a USB device faster, connect the device to the USB
1 (SERVICE)
,
2
port on the
product. The read/write rate will be affected by the USB device and your PC.
―
For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.
―
With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
―
For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
―
The super charging can only be provided through port
2
. According to the USB battery charging
specification,
2
can support a maximum current of 1.5A. The actual current value depends on the device
to be charged.
If the current is too high or an exception occurs, the over-current protection will be triggered. This is a normal
setting of the product.
―
USB devices requiring high current may not be supported.
1 (SERVICE)
can support a maximum current
of 1.0A, and
2
can support a maximum current of 1.5A.
―
The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered
off.
―
Charging your USB device is not possible if the power cable is disconnected from the power socket.
―
The company is not liable for problems or damages to an external device caused by using an unauthorized
cable for the connection.
―
Some products do not follow the USB standard, and it may cause a malfunction of the device.