Connect to a hidden Wi-Fi network
If the Wi-Fi network you want is not listed after a scan, you can still connect to it by entering the
information manually. Ask the Wi-Fi network administrator for the name and password before you
begin.
From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.
Tap Add network at the bottom of the list.
Enter information about the Wi-Fi network:
Network name: Type the exact name of the network.
Security: Select a security option from the list, and enter the password if required.
Password: Enter the network password.
Hidden network: Add a hidden network.
View more: Define other advanced options, such as IP and Proxy settings.
Tap Save.
Scan QR code to connect to a Wi-Fi network by using your device’s camera to
scan a QR code.
Intelligent Wi-Fi settings
You can configure connections to various types of Wi-Fi networks and hotspots, manage saved
networks and look up your device's network addresses. Options may vary by service provider.
From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.
Tap More options > Intelligent Wi-Fi for the following options:
Switch to mobile data: When enabled, your device will switch to mobile data whenever the
Wi-Fi connection is unstable. When the Wi-Fi signal is strong, it switches back to Wi-Fi.
Turn Wi-Fi on/off automatically: Turn on Wi-Fi in frequently-used locations.
Auto Hotspot connection: Automatically connect to a Wi-Fi hotspot when detected.
Intelligent Wi-Fi: View the Intelligent Wi-Fi version.
91
To Next Page
Loading...
