Samsung Galaxy A42 5G Guide

Guide 1 for Samsung Galaxy A42 5G
This guide is intended to provide support to you when you return your old mobile
phone and the switch to your new mobile phone.
Below are instructions on how to install your new mobile phone and how to
install MFA, multifactor authentication on the new device. This is followed by a
description of how to factory restore your old mobile phone, which you need to
do before submitting it to the Service Center.
If you have content that you want to transfer from your old mobile phone to your
new one, use the “Guide 2 for Samsung Galaxy A42 5G” instead. The content
transfer needs to be done before the factory reset.
Install your new mobile phone
1. Pick up your new mobile phone at Service Center.
2. Insert the SIM card, from your old mobile phone into the new
device. The hatch is located at the top left of the new device.
3. Turn on the device by pressing the on/off button on the right
4. Then select the language you want the device to display. Press
“Next”.

Samsung Galaxy A42 5G Specifications

General

Display Size	6.6 inches
Display Type	Super AMOLED
Resolution	720 x 1600 pixels
Processor	Qualcomm Snapdragon 750G 5G
RAM	4GB/6GB/8GB
Storage	128GB
Expandable Storage	microSDXC (dedicated slot)
Rear Camera	48 MP (wide) + 8 MP (ultrawide) + 5 MP (macro) + 5 MP (depth)
Front Camera	20 MP
Battery Capacity	5000 mAh
Charging	Fast charging 15W
Dimensions	164.4 x 75.9 x 8.6 mm
Colors	Prism Dot Black, Prism Dot White, Prism Dot Gray
Network	GSM / HSPA / LTE / 5G
SIM	Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by)
WLAN	Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot
Bluetooth	5.0, A2DP, LE
USB	USB Type-C 2.0
Sensors	Fingerprint (under display, optical), accelerometer, gyro, proximity, compass
Operating System	Android 10, upgradable to Android 13
Weight	193 g
NFC	Yes