Turn on Wi-Fi automatically: Turn on Wi-Fi in frequently used locations.•
Detect suspicious networks: Get notified when suspicious activity is detected on the current
Wi-Fi network.
•
Show network quality info: Display network information (such as speed and stability) in the
list of available Wi-Fi networks.
•
Wi-Fi power saving mode: Enable Wi-Fi traffic analysis to reduce battery usage.•
Network notification or Wi-Fi notifications: Receive notifications when open networks are
detected.
•
Show Wi-Fi pop-up: Alert me that Wi-Fi is available when opening apps.•
Manage networks: View saved Wi-Fi networks and configure whether to auto reconnect to or
forget individual networks.
•
Wi-Fi control history: View apps that have recently turned your Wi-Fi on or off.•
Hotspot 2.0: Connect automatically to Wi-Fi networks that support Hotspot 2.0.•
Install network certificates: Install authentication certificates.•
Wi-Fi Direct
Wi-Fi Direct uses Wi-Fi to share data between devices. You can disconnect your device from a Wi-Fi
Direct device if needed.
Swipe down from the top of the screen to open the Quick settings panel, and then tap the
Settings icon. Tap Connections.
1.
Tap Wi-Fi, and then tap the switchto turn on Wi-Fi.2.
Tap More options (the three vertical dots), and then tap Wi-Fi Direct.3.
Select a device, and then follow the prompts to connect.4.
To disconnect from a Wi-Fi Direct device, navigate back to Wi-Fi Direct and then select the
device again.
5.
To Next Page
Loading...
