Accounts & Backup >External storage transfer
External storage transfer
MicroSD card types
Unless you are a tech wizard, you probably aren't aware that microSD cards (
"https://www.samsung.com/us/support/answer/ANS00078934/" ) come in multiple classes. Other than storage
capacity, there are different factors that separate them. Some also come with extra features that give them
distinct classifications.
MicroSD cards offer capacity up to 2GB. •
MicroSDHC (High Capacity) cards offer capacity up to 32GB. •
MicroSDXC (extended Capacity) cards offer capacity from over 32GB and up to 2TB. •
Each type of card has a speed rating of 2, 4, 6, 8, or 10, from slowest to fastest. •
While you can use any class of microSD cards in your phone or tablet, the microSDXC card is recommended for
high-resolution video recording, due to its large storage capacity and high-speed read and write capability. For
less demanding use, such as still photography, regular microSD or microSDHC cards will be sufficient.
Insert the microSD card
Note:Not all phone or tablet models support microSD cards. On these models, there will only be a slot for the
SIM card.
MicroSD cards give you tons of space on your phone or tablet, but they are really tiny. Just be careful not to drop
or lose the microSD card.
Insert the ejector tool (which comes with your phone or tablet) into the hole in the SIM and microSD card
tray on the top of your phone or tablet. If you have any issues removing or inserting the SIM card
tray,service may be necessary. If you need a replacement SIM ejector tool, you may be able to get one
from your carrier or an electronics retailer.
Important: Be careful not to insert the ejector tool into any of the microphone or speaker holes along the
edge of your device. Look for the outline of the tray to make sure you're in the right place.
1.
When the tray pops out, pull it out of the phone or tablet.2.
Carefully place the microSD card into the larger opening in the tray - the SIM card slot is the lower, smaller
opening. Then, reinsert the tray into the device.
3.
To Next Page
Loading...
