Samsung Galaxy Book Flex - BIOS Password Settings

Settings & Upgrade
71
Setting passwords
There are three password settings available: Supervisor Password ,
User Password , and HDD Password .
•
Supervisor Password (low security level): This password is
required when turning on the computer or entering the BIOS
setup.
•
User Password (low security level): This password is required
to enter the BIOS setup. This password will be deactivated
automatically if the
Supervisor Password is disabled.
•
HDD Password (high security level): This password is required
to access the hard disk drive (HDD) from another computer.
This password may not be supported, depending on the
model.
Boot password
Setting a password with the BIOS enhances protection against
viruses and hacking attacks.
•
Do not forget your password or expose it to others.
•
If you forget the Supervisor Password or HDD
Password
, request assistance from the Samsung
Service Center. In this case, a service fee will be charged.
•
If you forget the User Password , disable the Supervisor
Password
, and the User Password will also be
automatically disabled.