STEP 2
• After the motherboard is positioned properly reconnect all components and cables but, make sure the battery is
reconnected last.
• Place back housing over the device by starting at the bottom, lining the chargeport into the socket designated for it.
Push down on the top of the glass display because the top has hinges that need to be cleared before frame fits all the
way into the frame.
• Smooth out the glass with your hands as you lay it in flush. Do not force it on first try might mean it needs to be pulled
out and repositioned.
Tools: Philips screwdriver, spudger, Fingers
To Next Page
Loading...
