Appendix
275
Hearing
Sound detectors
Set the device to vibrate when it detects your doorbell or a baby crying.
While this feature is enabled, the voice recognition will not operate.
Baby crying detector
Launch the
Settings
app, tap
Accessibility
→
Hearing
→
Sound detectors
, and then tap the
Baby crying detector
switch to activate it. The device will vibrate when it detects sound and
the alert will be saved as a log.
Doorbell detector
1
Launch the
Settings
app, tap
Accessibility
→
Hearing
→
Sound detectors
, and then tap
the
Doorbell detector
switch to activate it.
2
Tap to make a recording of your doorbell.
The device will detect and record the doorbell.
3
Tap
and ring your doorbell to check if it is recorded correctly. When the device detects
the doorbell sound, tap
OK
.
To change the doorbell sound, tap
Change doorbell sound
.
The device will vibrate when it detects sound and the alert will be saved as a log.
Setting light notification
Set the device to blink the flash or the screen when an alarm sounds or when you have
notifications, such as incoming calls or new messages.
Launch the
Settings
app, tap
Accessibility
→
Hearing
→
Flash notification
, and then tap
the switches next to the options you want to activate.
To Next Page
Loading...
