36
• Do not put stickers or sheets (e.g. commercially
available protective lms, peep prevention sheets)
on the display. Doing so might hinder correct
operation of the touch panel.
• When using a protective lm, make sure that it is a
product compatible with the ngerprint recognition
sensor.
• If you attach a commercially available protective lm
on the display, ngerprint recognition may fail.
• When carrying the product in your pocket or bag,
take care not to put the touch panel close to metals
or other conductive materials, as it might cause
false operation of the touch panel.
• Although lightning intensity of OLED can be
decreased partly and displayed color can be
changed when the same image has been displayed
for a long time, the brightness set to bright more
than necessary or using extremely for a long time. It
is not abnormal because that is the characteristic
of OLED.
• Although the OLED used on the product is made
using high-precision technology, some pixels
(dots) might be lit or out at all times. Or color may
be changed or unevenness of brightness may be
shown if looked at from dierent angles. Note that
that is because of the structure of OLED, not a
fault.
• Leaving the OLED exposed to the direct sunlight
might cause a fault. Take care when you place the
product by the window or outside.
To Next Page
Loading...
