Samsung Galaxy Note20 Ultra 5G User Manual

Settings
208
Connecting to a Wi-Fi network
1
On the Settings screen, tap Connections
→
Wi-Fi , and then tap the switch to activate it.
2
Select a network from the Wi-Fi networks list.
Networks that require a password appear with a lock icon. Enter the password and tap
Connect .
•
Once the device connects to a Wi-Fi network, the device will reconnect to that
network each time it is available without requiring a password. To prevent the
device connecting to the network automatically, tap the network name and tap
Auto reconnect to remove the the checkmark.
•
If you do not want to connect to the network again, tap the network name and tap
FORGET.
•
If you cannot connect to a Wi-Fi network properly, restart your device’s Wi-Fi feature
or the wireless router.
Wi-Fi Direct
Wi-Fi Direct connects devices directly via a Wi-Fi network without requiring an access point.
1
On the Settings screen, tap Connections
→
Wi-Fi , and then tap the switch to activate it.
2
Tap Wi-Fi Direct .
The detected devices are listed.
If the device you want to connect to is not in the list, turn on its Wi-Fi Direct feature.
3
Select a device to connect to.
The devices will be connected when the other device accepts the Wi-Fi Direct connection
request.

Samsung Galaxy Note20 Ultra 5G Specifications

General

RAM	12GB
Front Camera	10 MP
Battery	4500 mAh
Dimensions	164.8 x 77.2 x 8.1 mm
Weight	208 g
Water Resistance	IP68
Colors	Mystic Bronze, Mystic Black, Mystic White
Display	6.9-inch Dynamic AMOLED 2X
Resolution	3088 x 1440 pixels
Processor	Exynos 990 / Qualcomm Snapdragon 865+
Storage Options	128GB, 256GB, 512GB
Main Camera	108MP wide + 12MP periscope telephoto + 12MP ultrawide
Operating System	Android 10
Connectivity	5G, LTE, Wi-Fi 6, Bluetooth 5.0, NFC, USB-C
S Pen	Yes