132
2. Tap
Voice search
to configure the following:
• Language
: Choose a language for your voice input.
• Speech output
: Sets whether you will use speech output
always or only when using hands-free.
• Block offensive words
: Enable or disable blocking of
recognized offensive words from the results of your voice-input
Google searches.
• Hotword detection
: Enable to being able to launch voice
search by saying the word “Google”.
• Download offline speech recognition
: Enables voice input
while offline.
3. Tap
Text-to-speech output
and select
Google Text-to-
speech Engine
.
4. Tap next to
Google Text-to-speech
to configure the
following settings:
• Language
: allows you to set the language for spoken text.
• Settings for Google Text-to-speech
: allows you to view Open
Source Licenses. This option only appears when you have
selected Google Text-to-speech as your preferred TTS engine.
• Install voice data
: allows you to install voice data for speech
synthesis. This option only appears when you have selected
Google Text-to-speech as your preferred TTS engine.
5. Scroll down to the
General
section to access the
following options:
• Speech rate
: Set the speed at which the text is spoken.
• Listen to an example
: Play a sample of speech synthesis
(available if voice data is installed).
6. Tap the ON/OFF icon next to
Driving mode
to
turn it on and enable incoming calls and notifications to
be read out automatically.
Pointer speed
This option sets your Pointer speed.
1. From the Home screen, tap ➔
Settings
➔
Language and input
.
2. Tap
Pointer speed
then drag the slide to the right to go
faster or to the left to go slower.
3. Tap
OK
to save your setting.
To Next Page
Loading...
