Changing Your Settings 135
Caution!
Excessive shaking or impact to the device may cause
unintended results. To learn how to properly control
motions, tap ➔
Settings
➔
Motion
➔
Learn
about motions
.
3. The following options are available. Tap an option to
activate the feature. A checkmark is displayed.
• Direct call
: Once enabled, the device will dial the currently
displayed on-screen Contact entry as soon as you place the
device to your ear.
•Smart alert
: Once enabled, pickup the device to be alerted and
notified of you have missed any calls or messages.
• Double tap to top
: Once enabled, double tap the top of the
device to be taken to the top of the current on-screen list.
• Tilt to zoom
: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold two
points on the display then tilt the tilt the device back and forth to
zoom in or out.
• Pan to move icon
: Once enabled, touch and hold a desired
application shortcut icon or widget on the screen. Once it
detaches, move the device left or right to migrate it to a new
location.
• Pan to browse images
:
Once enabled, touch and hold a
desired on-screen image to pan around it. Move the device left
or right to pan vertically or up and down to pan horizontally
around the large on-screen image.
• Shake to update
: Once enabled, shake your device to rescan
for Bluetooth devices, rescan for Wi-Fi devices, Refresh a Web
page, etc.
• Turn over to mute/pause
: Once enabled, mute incoming calls
and any playing sounds by turning the device display down on
a surface. This is the opposite of the Pickup to be Notified
Gesture.
• Sensitivity settings
: allows you to access additional settings
for Gyroscope calibration, Tilt to zoom, Pan to move icon, and
Pan to browse images.
• Learn about motions
: provides additional help on using the
different motions.
To Next Page
Loading...
