Section 8: Changing Your Settings
This section explains the settings used for customizing your
Activating Wi-Fi Direct
device.
Wi-Fi Direct allows device-to-device connections so you can
Accessing Settings
transfer large amounts of data over a Wi-Fi connection.
1. From the Home screen, tap
Settings
Wi-Fi
.
– or –
2. At the bottom of the Wi-Fi screen, tap the
Wi-Fi Direct
button.
From any Home screen, tap
Settings
.
From any Home screen, press
Settings
.
For more information, refer to “Wi-Fi Direct” on page
The Settings screen displays.
153.
Wi-Fi Settings
Advanced Wi-Fi Settings
This section describes the Wi-Fi settings. For information on
The advanced Wi-Fi settings allow you to set up and manage
how to use Wi-Fi, see “Wi-Fi” on page 151.
wireless access points.
Activating Wi-Fi
1. From the Home screen, tap
Settings
Wi-Fi
.
1. From the Home screen, tap
Settings
Wi-Fi
.
Advanced
.2. Tap
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
The following options are available:
field, to turn Wi-Fi ON
.
• Network notification
: alerts you when a new WAP is available.
3. Tap
Scan
to scan for available Wi-Fi networks. For more
• Keep Wi-Fi on during sleep
: allows you to specify when to
information, refer to “Connect to a Wi-Fi Network” on
disconnect from Wi-Fi.
page 152.
• Check for Internet service
: Checks if Wi-Fi internet service is
available when connected to an AP (Access Point).
Changing Your Settings 111
To Next Page
Loading...
