Security
The Security settings allow you to determine the security level for
your device.
Encrypt Device
When enabled, this feature requires a numeric PIN or password to
decrypt your device each time you power it on or encrypt the data on
your SD card each time it is connected:
1. From the Home screen, press
and then tap
Settings
(
More
tab)
Security
.
2. Tap
Encrypt device
. For more information, read the displayed
help screen.
3. Tap
Encrypt external SD card
to enable the encryption on SD
card data that requires a password be entered each time the
microSD card is connected.
Tip:
Make sure your battery is charged more than 80 percent.
Encryption may take an hour or more.
Factory data reset password
Create or change a password required by users to access the factory
reset functionality.
1. From the main
Settings
page, tap
More
tab
Security
.
2. Tap Set up/change password.
3. Follow the on-screen prompts to either create a new password
or change an existing one.
383
To Next Page
Loading...
