121
Scan for Wi-Fi Networks
To make sure you have an accurate list of Wi-Fi networks.
Touch
Settings
➔
Wi-Fi
, and then touch
Scan
.
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts), security
type, and other properties:
1. Touch
Settings
➔
Wi-Fi
, and then touch
Add
Wi-Fi network
.
2. Use the keyboard to enter
Network SSID
.
3. Touch the
Security
field and then touch a security type.
Note:
Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
4. If necessary, touch
Password
and enter the password or
hex key.
5. Touch
Connect
.
Advanced Settings
Set up and manage wireless access points.
1. Touch
Settings
➔
Wi-Fi
.
2. Touch
Menu
➔
Advanced
.
The following options display:
• Network notification
: Have your device alert you to new
Wireless Access Points (WAPs). Touch
Network notification
to
turn notifications On or Off. When enabled, a check mark
appears in the check box.
• Keep Wi-Fi on during sleep
: Specify when to disconnect from
Wi-Fi.
•MAC address
: View your device’s MAC address, which is
required when connecting to some secured networks (not
configurable).
•IP address
: View your device’s IP address.
To Next Page
Loading...
