Level
2
Repair
Distribution, transmission, or infringement of any content or data from this document without Samsung
’s
written authorization is
strictly prohibited.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
7-2
1)
Pull marked point.
2)
DISASSEMBLE BATTERY.
Battery demolition be used only hand.
The disable tweezers, Driver, JIG
1)
Check each part.
1)
Prepare the ruler or the card which can check
5.7
mm thickness.
2)
Place the Battery on the flat surface like the picture
(
※
Printed image should be top)
1)
Check the battery flatness using the ruler or the card
2)
In case of NG, battery should be replaced with
new one.
4
5
Disassemble BATTERY
Disassemble PBA
5.7mm OK NG
6
6-1
Check Battery flatness
Check Battery flatness
To Next Page
Loading...
