Apps and features
46
Connecting another S Pen
Before using S Pen features with another S Pen, such as S Pen remote, you must connect the
S Pen to your device.
1
Attach the S Pen to the S Pen’s charging groove.
2
Open the notification panel, tap (
S Pen air actions
), and tap again to reactivate it.
3
Tap
Connect new S Pen
.
S Pen will be connected. You may experience a brief delay before it finishes connecting.
•
You can only connect Samsung-approved S Pens that support Bluetooth Low
Energy (BLE).
•
Do not detach the S Pen from the device when it is being connected. Doing so will
interrupt the process.
•
If it fails to connect or you want to use the previous S Pen, reconnect it with the
method shown above.
Resetting your S Pen
If the S Pen has connection problems or the S Pen disconnects often, reset the S Pen and
connect it again.
Attach the S Pen to the S Pen’s charging groove. Then, open the S Pen remote setting screen
and tap
→
Reset S Pen
.
To Next Page
Loading...
