Samsung Galaxy Tab3 - Page 126

121
Scan for Wi-Fi Networks
To make sure you have an accurate list of Wi-Fi networks.
 Touch Settings ➔ Wi-Fi , and then touch Scan .
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts), security
type, and other properties:
1. Touch
Settings ➔ Wi-Fi , and then touch Add
Wi-Fi network
.
2. Use the keyboard to enter
Network SSID .
3. Touch the
Security field and then touch a security type.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
4. If necessary, touch
Password and enter the password or
hex key.
5. Touch
Save .
Advanced Settings
Set up and manage wireless access points.
1. Touch
Settings ➔ Wi-Fi .
2. Touch
Menu ➔ Advanced .
The following options display:
• Network notification : Have your device alert you to new
Wireless Access Points (WAPs). Touch
Network notification to
turn notifications On or Off. When enabled, a check mark
appears in the check box.
• Keep Wi-Fi on during sleep : Specify when to disconnect from
Wi-Fi.
• Wi-Fi timer : Specify the Starting time and the Ending time
for Wi-Fi to be connected.
•MAC address : View your device’s MAC address, which is
required when connecting to some secured networks (not
configurable).
•IP address : View your device’s IP address.