30
Notes on Usage
• If you run an application on the product when
using the Wireless PowerShare function to charge
another device, it may not fully charge.
• Reception quality may decrease while using the
Wireless PowerShare function to charge another
device.
• Do not move the product and another device, while
using the Wireless PowerShare function to charge
another device.
• Do not put credit cards, nor contactless IC cards, etc.
between the product and another device when using
the Wireless PowerShare function to charge another
device. Another device will not be able to be charged,
and will heat up while charging, and the product and
the cards might malfunction, or be damaged.
• Do not use earphones while using the Wireless
PowerShare function of the product. It may aect
nearby equipment.
• Do not put stickers or sheets (e.g. commercially
available protective lms, peep prevention sheets)
on the display.
• Do not press on the display with pointed objects
such as pen points or ngernails, etc. Do not apply
excessive pressure.
• Do not press hard on the display, but lightly tap it.
• When carrying the product in your pocket or bag,
take care not to put the touch panel close to
metals or other conductive materials, as it might
cause false operation of the touch panel.
• Although lightning intensity of OLED can be
decreased partly and displayed color can be
changed when the same image has been displayed
for a long time, the brightness set to bright more
than necessary or using extremely for a long time. It
is not abnormal because that is the characteristic
of OLED.
• Although the OLED used on the product is made
using high-precision technology, some pixels
(dots) might be lit or out at all times. Or color may
be changed or unevenness of brightness may be
shown if looked at from dierent angles. Note that
that is because of the structure of OLED, not a
fault.
• Leaving the OLED exposed to the direct sunlight
might cause a fault. Take care when you place the
product by the window or outside.
To Next Page
Loading...
