Now, power on your phone and you’re good to go! If you are prompted for an unlock code, contact the
phone's original carrier.
5.
If you have any issues removing or inserting the SIM card tray,service may be necessary. If you need a
replacement SIM ejector tool, you may be able to get one from your carrier or an electronics retailer.
Remove the SIM card
If you ever need to take out your SIM card for any reason, just reverse the steps we mentioned earlier.
First, insert the ejector tool into the hole on the SIM card tray, and then push it until the tray pops out.1.
Remove the SIM card from the tray, and then insert the SIM tray back into the slot.2.
If you have any issues removing or inserting the SIM card tray,service may be necessary.
To Next Page
Loading...
