CONFIDENTIAL
3 Disassembly and Reassembly
3-2 GH19P*
3-2 Disassembly
Reassembly procedures are in the reverse order of Disassembly procedures.
1. Put the jig into the left openning hole and lift
up the panel until the snap of the Cover Rear
opens.
2. Put the jig into the right opening hole and lift
up the panel until the snap of the Cover Rear
opens.
3. Put the jig into the gap (between the right side
of the panel the and Front Cover) and tilt up
Front Cover until the snap opens.
4. Put the jig into the gap (between the right side
of the panel the and Front Cover) and tilt up
Front Cover until the snap opens.
To Next Page
Loading...
