SAMSUNG Proprietary-Contents may change without notice
Level
3
Repair
8-15
This Document can not be used without Samsung's authorization
8-3-5.
Microphone Part
Check R432
=2.2V
at Mic Active?
Check the MIC signal paths.
MIC signals are on.
(
TP
:
L403,L410,C422,
C420,R432,R435,R437)
Replace the UCP200 using
a
Heatgun
(
Because of not soldering well
)
Resolder L403, L410, C422, C420, R432, R435,
R437
(
not work if those is not connected.)
END
No
Yes
Yes
Yes
Yes
No
Check the MIC is demaged.
No
Replace an another MIC
Microphone does not work