Samsung GT-C3530 - Camera Part

SAMSUNG Proprietary-Contents may change without notice
Level
3
Repair
8-29
This Document can not be used without Samsung's authorization
8-3-12.
Camera Part
Check the Camera Enable signal
is High.
(
TP
:
R315
=1.8
V)
Replace the UCP200, using the heatgun.
END
No
Yes
No
If C317 is not
1.8
V, Replace the U313.
If C311, C312 is wrong, Replace the U314.
Check the Camera operating
voltage is correct.
(
TP
:
C317
=1.2
V, C311
=1.8V
C312
=2.8
V)
Check CAM_RST is high,as soon
as camera works.
(
TP
:
TP_CAM_RST
=1.8
V)
No
Replace the UCP200, using the heatgun.
Change the CN400.
No
Check the Camera is demaged.
Change the Camera module.
Camera does not work.
Yes
Yes
Yes
Yes
Yes