Samsung HP-S4253 - Customizing Picture Settings

53
1
Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3
Press the ENTER button.
Press the ▲ or ▼ button to select the desired picture
mode (Dynamic, Standard, Movie, Custom), then press
the ENTER button.
4
Press the ▲ or ▼ button to select a particular option
(Contrast, Brightness, Sharpness, Color, or Tint), then
press the ENTER button.
Press the œ or √ button to decrease or increase the
value of a particular item.
• You can also select these options (Contrast,
Brightness, Sharpness, Color, or Tint) by pressing
the ▲ or ▼ button.
Continued...
Notes
•“Tint” doesn’t operate in PC, HDMI or any Component mode.
• The Tint cannot be adjusted while watching Digital TV.
• In PC mode, only the Contrast and Brightness can be selected.
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
“Tint”, and “Color Tone” according to personal preference. You can select “Standard” which
automatically recalls your personalized picture settings.
Mode TV
Move Enter Return
Mode : Dynamic √
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
√
Reset
Mode TV
Move Enter Return
Mode : Custom √
Contrast 80
Brightness 50
Sharpness 50
Color 50
Tint G 50 R 50
Color Tone : Cool1
√
Reset
Mode : Dynamic √
Size : 16:9 √
Digital NR : On √
DNIe : On √
Film Mode : Off √
Blue Screen : Off √
PIP
Picture TV
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Color Tone : Cool1
Reset
Mode TV
Move Enter Return
Dynamic
Standard
Movie
Custom
➤
➤
Quick way to access the picture setting: Just press “P.MODE” button
on the remote control.
Contrast
80
BN68-00991B-01Eng(052~065) 2/17/06 1:59 PM Page 53