59
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “PIP”, then press the
ENTER button.
3
Press the ▲ or ▼ button to select “Source”, then press
the ENTER button.
4
Press the ▲ or ▼ button to cycle through all of the
available signal sources:
“TV”, “AV1”, “AV2”, “S-Video1”, “S-Video2”,
“Component1”, “Component2”, “HDMI1”, or “HDMI2”.
The signal from these inputs will not appear if you
have not connected any equipment to the TV’s
respective input jacks.
5
Press the EXIT button to exit.
Notes
• The same source cannot be selected on both the main and sub screens. However, the same source
can be selected on both the main and sub screens for TV.
• PC is not available in PIP picture.
Mode : Dynamic
√
Size : 16:9
√
Digital NR : On
√
DNIe : On
√
Film Mode : Off
√
Blue Screen : Off
√
PIP
Picture
TV
Move Enter Return
PIP : On
Source : TV
Swap
Size :
Position :
Channel : Air 3
PIP
TV
Move Enter Return
PIP : On
√
Source : TV
√
Swap
Size :
√
Position :
√
Channel : Air 3
√
PIP
TV
Move Enter Return
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
HDMI1
HDMI2
BN68-00991B-01Eng(052~065) 2/17/06 1:59 PM Page 59
To Next Page
Loading...
